AB-C80
Automatic security barrier - Withstands the impact of a 7.2-tonne HGV at 80 km/h
Security barriers and gates
AB-C80
Automatic security barrier - Withstands the impact of a 7.2-tonne HGV at 80 km/h
Standard characteristics:
- Arm: Rectangular aluminium 185 x 100 mm
- Housing: 4 mm thick cataphoresis treating pickled sheet with RAL 5015
- Cover: 3 mm thick steel
- Posts: AVB and RAL 9010 1/2 shells
- ONE-C control board including: Power supply, PLC, frequency converter, SD card, RJ45 (Modbus) and torque limiter
- Automatic locking at the moment of impact
- Lockable by padlock
- Angle sensor
Optional features:
Security
- Internal mechanical lock
- Electromechanical arm lock
- Magnetic lock
- Housing protection kit lockable by padlock
- Small light post to be mounted on struts
- Flashing light
- Reporting to terminal block
- IR cell
- Loop detector
Customisation
- Choice of RAL colours on housing
- RAL colour on struts
- Boom : 185 x 100 mm
- Operation time : 10 to 15s
- MCBF (number of cycles) : ≥ 3 million
- MTBF (hours) : ≥ 15,000
- MTTR (min) : Less than 30 minutes
- Maximum boom length : 2 to 6 m
- Finishes : RAL 5015 barrier housing /RAL 9010 posts & arm
- Drive system : Electric - 230V
- Resistance : 1,777,000 J
- Behavior in case of power cut : Crank operation
- Operating temperature : '-20° to +50° C
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBA 12
Heavy-duty automatic barrier designed for passages of up to 12 m. It incorporates a one-piece aluminium or fibreglass arm without bracing. The three-phase drive system is managed by a ONE-C card for intensive use. Ideal for logistics sites or HGV access.
See the product
LBA H20
The LBA H20 tyre killer manufactured by AMCO is a retractable spike barrier with a hydraulic drive system. Made of steel, the H20 is available in lengths of 2 to 5 m, with steel spikes 20 mm thick and 21 cm high, spaced 85 mm apart The drive system is integrated in a separate compartment, accessible without disassembling the tyre killer The H20 is supplied with a 10 m cable for connection to the One-C control module. The high strength steel driving surface ensures durability and resistance to intensive use, even in environments subject to heavy traffic. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product
LBA H10
The LBA H10 tyre killer manufactured by AMCO is a retractable spike barrier with a universal joint transmission Made of steel, the H10 is available in lengths of 1 to 4.5 m, with 10 cm high steel spikes, spaced 125 mm apart The drive system is offset in a barrier housing or BDCA type unit. The H10 is a device to be mounted on a concrete slab. In the open position, it reduces the speed of vehicles. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product
AB-C50
The ALE-AB-C50 security barrier, manufactured by AMCO, is an automatic boom security barrier. Equipped with a 135 x 93 mm oval aluminium axial arm with an integrated retaining device, it is available in lengths of 2 to 6 m. The AB-C50 barrier is reinforced with two heavy-gauge steel struts to be sealed in a 50 cm deep concrete foundation. It is controlled by One-C logic, and smooth movements are ensured by the One-Sense angle sensor, which manages the acceleration and deceleration ranges. Its precision indicates the arm position to the nearest degree. The housing is made of 4mm thick steel, and the AB-C50 barrier offers all the features of the LBA12 barrier. The main arm is coupled with a second arm below it. The hostile vehicle mitigation (HVM) locking system is automatically activated in the event of an impact, so there is no need to position a device manually for the barrier to be fully effective. Its resistance is certified by a crash test carried out in accordance with IWA 14-1: the AB-C50 barrier stopped a 3.5 HGV lorry travelling at 48 km/h.
See the product