Barriers
LBA 10
Barrier with high strength fibreglass arm up to 10 m
Main advantages
Variable speed
Adjustable from 3.1 to 10.5 seconds
Fibreglass arm
One-piece reinforced arm without bracing
Automatic opening system
Fail-safe opening possible
Rotary system (optional)
Anti-impact housing rotary system to prevent arm breakage
Body
Cataphoresis treated steel
- Speed: Variable from 3.1 seconds
- Continuous operation: 10,000 cycles/day
- Arm: ø140 mm tapered axial reinforced fibreglass from 2 to 10 m / one-piece and without bracing
- Geared motor: Three-phase / 230v single-phase power supply
- Spring: Spring compression-based compensation
- Housing: Cataphoresis treated steel sheet with a Ronis 405 lock + Standard RAL 5015
- Cover: 2 mm thick aluminium sheet with RAL 9010 paint
- ONE-C control board including: Power supply, PLC, frequency converter, SD card, RJ45 (Modbus) and torque limiter
- ONE-SENSE sensor: Automatic motor management and control
- Reduction gear: Reversible/irreversible (to be defined)
- Maximum length : 10 metres
- Articulated lower gate : yes
- Power supply : 230 V
- Gearmotor : Irreversible or reversible reduction gear (optional)
- Compensator : Compression spring + guide, chain and sprocket
- Boom : Ø140 mm polyester reinforced fibreglass
- Operation time : From 3.1 seconds (variable depending on options)
- MCBF (number of cycles) : ≥ 5 million
- MTBF (hours) : ≥ 15,000
- MTTR (min) : Less than 30 minutes
- Maximum boom length : 10 metres
- Emergency operation : Irreversible geared motor: crank operation - Reversible geared motor: automatic fail-safe opening
- Temperature control : Anti-condensation heating
- Finishes : Cataphoresis treated steel housing and polyester powder coating + paint (choice of RAL colours)
- Weight : From 192 to 205 kg
- Power : 0.55 kW three-phase motor (irreversible) - 0.25 kW three-phase motor (reversible)
- Foundation dimensions (LxWxH) : 800 x 800 x 1,000 mm
- Operating temperature : '-30° to +55° C
Automatic fail-safe opening
Customisation:
- Special colour polyester paint (RAL to be defined)
- Local controls: emergency services access control box, push button box, etc.
- Galvanised corrosion-proof body
- LBA Connect: Geolocation and control of equipment
Audible & visual signals:
- Cover with LEDs
- Flashing lights on the arm
- R23 lights on the integrated post
- Flashing light on the housing
- Ø 450 mm, 650 mm standardised signs
- Cover with LEDs
Security:
- Infrared barrier
- Retro-reflective photoelectric cell
- Magnetic loop presence detector
- Ultrasonic detector
- Manual anti-impact rotary system
- Motorised rotary system (facilitating maintenance)
- Anti-vandalism pack
- Forced opening alarm
- Gate pivoted reporting
- 80 x 80 mm tube adjustable tip support
- Magnetic lock on the tip support
- Ø14 mm articulated low grid up to 6m
- Adjustable tilting support
- Internal anti-fraud lock (reversible)
Options for a barrier suitable for each site
Each site has specific security, traffic, and operational constraints. LBA options allow you to configure your automatic barrier according to your needs: enhanced visibility, anti-vandalism protection, unhinging, automatic lifting, accessories, and supports.
Discover LBA options
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBA 6 - BRA
A swing barrier with an arm of up to 6 m in length, designed to organise access to areas with a large clearance width and to control the passage of vehicles in road tunnels.
See the product
LBA 12 CDV (coupure de voie)
LBA 12 CDV : barrière automatique lourde de coupure de voie pour usage intensif, conçue pour un fonctionnement continu jusqu’à 1 000 manœuvres/jour. Équipée d’une lisse axiale en fibre de verre armée Ø140 mm jusqu’à 12 m, d’un dispositif de rotation, d’une béquille pendulaire, de feux LED R24, panneaux B1 et d’une sécurité par boucles magnétiques, elle assure une coupure complète et sécurisée de la voie. Pilotage par carte ONE-C avec variation de fréquence, communication Modbus TCP/IP – RS485 et certification PL-d (EN ISO 13849-1).
See the product
LBA 8 CDV (coupure de voie)
La barrière automatique LBA 8 CDV lourde de coupure de voie pour usage intensif et continu, conçue pour jusqu’à 10 000 manœuvres/jour. Équipée d’une lisse axiale en fibre de verre armée Ø140 mm jusqu’à 8 m, sans haubanage, avec béquille pendulaire, dispositif de rotation du fût, feux LED R24, panneau B1 et signalisation sonore. Sécurité assurée par boucles magnétiques et/ou détecteurs ultrasons. Motorisation triphasée, commande ONE-C avec variation de fréquence, communication Modbus TCP/IP – RS485 et certification PL-d (EN ISO 13849-1).
See the product
LBA 12
Heavy-duty automatic barrier designed for passages of up to 12 m. It incorporates a one-piece aluminium or fibreglass arm without bracing. The three-phase drive system is managed by a ONE-C card for intensive use. Ideal for logistics sites or HGV access.
See the product
LBA 86
Heavy-duty anti-vandalism barrier with reinforced axial arm up to 6 metres. Three-phase One-C drive system, continuous operation up to 10,000 cycles/day. Cataphoretic structure, aluminium cover and integrated PL-d safety device. Ideal for sensitive, industrial or high-traffic public sites.
See the product
LBA 86 AVB
Reinforced version of the LBA86 with struts and anti-lift tip supports. Oval arm up to 6 m and integrated electromagnetic lock. Anti-vandalism pack with reinforced protection supplied as standard. Designed for areas at risk of forced entry attempts.
See the product