Road blocker & Tyre Killers
LBA H20
Security automatic reversible tyre killer
Standard characteristics:
- Tyre killer:
- Automatic recessed tyre killer up to 5 m
- Withstands an axle load of 40 tonnes
- Folded steel sheet casing housing the teeth and hydraulic unit
- Finishes:
- Mechanically welded steel tread plate with reinforcements
- Standard RAL 1021 for the tread plate and RAL 3020 for the teeth
- Operation:
- Controlled by ONE-C PLC: Power supply, PLC, frequency converter, SD card, RJ45 (Modbus) and torque limiter
- Pedestrian protection with black cap
- Magnetic limit switches
- Compatible with all our barriers
- Built-in hydraulic drive system
- Installation:
- 5 m nylon bearing-mounted tooth mounting shaft
Standard equipment:
Customisation
- Special colour paint on RAL base
- Maximum length : 5 metres
- Power supply : 230 V
- Operation time : From 1.5 seconds
- MCBF (number of cycles) : 5 000 000
- MTBF (hours) : 15,000
- Finishes : 250 ° polyester powder coating
- Voltage : 680 W
- Operating temperature : '-30° to +50° C
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBA 10
The LBA 10 is a heavy-duty barrier designed to withstand impacts and intensive use. It can be fitted with reinforced or fibreglass arms for heavy goods vehicles. It operates continuously for up to 10,000 cycles per day. It is fitted in industrial sites, technical hubs and critical infrastructures.
See the product
LBA 12
Heavy-duty automatic barrier designed for passages of up to 12 m. It incorporates a one-piece aluminium or fibreglass arm without bracing. The three-phase drive system is managed by a ONE-C card for intensive use. Ideal for logistics sites or HGV access.
See the product
LBA 86
Heavy-duty anti-vandalism barrier with reinforced axial arm up to 6 metres. Three-phase One-C drive system, continuous operation up to 10,000 cycles/day. Cataphoretic structure, aluminium cover and integrated PL-d safety device. Ideal for sensitive, industrial or high-traffic public sites.
See the product
RB50-C50 FP
The ALE RB50-C50 FP road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 50 cm in height, it is available in lengths of 2.5 to 4 m. The RB50 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. Its galvanised steel frame is just 12 cm high, allowing the device to be sealed in a 30 cm deep excavation. The RB50 can also be fixed to an existing or new concrete slab with access ramps. The bellows side is made of a flexible material that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered sheets removable by a person working alone and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the RB50 does not contain any integrated sensitive elements. Its resistance is certified by a digital crash test carried out by an independent Cofrac-accredited body in accordance with ISO 22343-1. The RB50 stopped a 7.2-tonne HGV travelling at 48 km/h. "
See the product
RB80-C80
The ALE RB80-C80 road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 80 cm in height, it is available in lengths of 2 to 4 m. The RB80 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. The reinforced steel side is made of a single piece that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered stainless steel sheets removable by a person working alone, and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (totem, cabinet, technical room, etc.). The underground part of the RB80 does not contain any integrated sensitive elements. Its resistance is certified by a double crash test, during which the RB80 stopped two 7.5-tonne HGVs travelling consecutively at 64 then 80 km/h, with the device remaining operational after both impacts and without vehicle penetration.
See the product
RB100-C80
The RB100-C80 automatic retractable road blocker, manufactured by AMCO, is designed to protect the most sensitive sites from hostile vehicles. It can withstand an impact of 12 tonnes at 80 km/h and is recommended for Seveso sites, embassies, and very high-security areas. The galvanised steel frame and stainless steel driving surface guarantee durability and resistance to wear, while the flexible front part prevents the device from jamming in the event of an impact. Thanks to its low sealing depth, the RB100-C80 is easy to install, without needing any major structural work. The drive system is a remote hydraulic system, with no sensitive elements integrated in the frame, ensuring maximum reliability. Its resistance has been validated by a double crash test certified by an independent Cofrac-accredited body: It is capable of stopping a 7.5-tonne vehicle at 80 km/h, then a 12-tonne vehicle at 80 km/h, with the system remaining operational after both impacts.
See the product
LBA H10
The LBA H10 tyre killer manufactured by AMCO is a retractable spike barrier with a universal joint transmission Made of steel, the H10 is available in lengths of 1 to 4.5 m, with 10 cm high steel spikes, spaced 125 mm apart The drive system is offset in a barrier housing or BDCA type unit. The H10 is a device to be mounted on a concrete slab. In the open position, it reduces the speed of vehicles. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product
AB-C50
The ALE-AB-C50 security barrier, manufactured by AMCO, is an automatic boom security barrier. Equipped with a 135 x 93 mm oval aluminium axial arm with an integrated retaining device, it is available in lengths of 2 to 6 m. The AB-C50 barrier is reinforced with two heavy-gauge steel struts to be sealed in a 50 cm deep concrete foundation. It is controlled by One-C logic, and smooth movements are ensured by the One-Sense angle sensor, which manages the acceleration and deceleration ranges. Its precision indicates the arm position to the nearest degree. The housing is made of 4mm thick steel, and the AB-C50 barrier offers all the features of the LBA12 barrier. The main arm is coupled with a second arm below it. The hostile vehicle mitigation (HVM) locking system is automatically activated in the event of an impact, so there is no need to position a device manually for the barrier to be fully effective. Its resistance is certified by a crash test carried out in accordance with IWA 14-1: the AB-C50 barrier stopped a 3.5 HGV lorry travelling at 48 km/h.
See the product