Barriers
LBA 12
Access closure barrier up to 12 m
Main advantages
Variable speed
Adjustable from 4.9 to 10.5 seconds
Fibreglass arm
One-piece reinforced arm without bracing
Optional rotary system
Anti-impact housing rotary system to prevent arm breakage
- Speed: Variable from 4.9 seconds
- Continuous operation: 10,000 cycles/day
- Arm: Fibreglass Ø 140 or oval aluminium 180 x 118 with reflective tape
- Geared motor: Three-phase / 230v single-phase power supply
- Spring: Spring compression-based compensation
- Housing: Galvanised treated steel sheet with a Ronis 405 lock + Standard RAL 5015
- Cover: Galvanised steel sheet
- ONE-C control board including: Power supply, PLC, frequency converter, SD card, RJ45 (Modbus) and torque limiter
- ONE-SENSE sensor: Automatic motor management and control
- Maximum length : 12 metres
- Articulated lower gate : yes
- Upper and lower gate : yes
- HP gate : yes
- Power supply : 230 V
- Gearmotor : Irreversible reduction gear
- Compensator : Compression spring + guide, chain and sprocket
- Boom : Fibreglass Ø 140 or oval aluminium 180 x 118 with reflective tape
- Operation time : From 4.9 sec (variable depending on options and length)
- MCBF (number of cycles) : ≥ 3 million
- MTBF (hours) : ≥ 15,000
- MTTR (min) : Less than 60 minutes
- Maximum boom length : 12 metres
- Emergency operation : Irreversible geared motor: crank operation
- Temperature control : Anti-condensation heating
- Finishes : 250° polyester powder coating (RAL to be defined)
- Power : 0.55 kW three-phase brake motor
- Foundation dimensions (LxWxH) : 1,000 x 1,000 x 1,000 mm
- Operating temperature : '-30° to +55° C
Customisation
- Rail application arm up to 12 m
- Local controls: emergency services access control box, push button box, etc.
- 80 x 80 mm adjustable tip support
- Magnetic lock on the tip support
- Adjustable tilting support
- Electromagnetic lock on the tip support
- Internal anti-fraud lock (reversible)
Audible & visual signals
- R2 flashing lights on the arm
- R24 lights on the post
- 450 or 650 standardised signs
- Hammer siren - forced opening alarm
- Access warning lights
- Arm with LEDs
Security
- Infrared barrier
- Retro-reflective photoelectric cell
- Magnetic loop presence detector
- Ultrasonic detector
- Anti-vandalism pack
- Articulated low grid or full height grid
- High protection grid (with 175x75 mm arm) up to 6 m
- Manual anti-impact rotary system
- Motorised rotary system (facilitating maintenance)
- AVB tip support
Options for a barrier suitable for each site
Each site has specific security, traffic, and operational constraints. LBA options allow you to configure your automatic barrier according to your needs: enhanced visibility, anti-vandalism protection, unhinging, automatic lifting, accessories, and supports.
Discover LBA options
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBA 74
Semi-heavy-duty barrier with straight or articulated arm up to 3.5 m. It is both robust and compact with a cataphoresis treated sheet metal housing. Three-phase motor and 10,000 cycles/day for intensive use. Suitable for use in public-access and community buildings and areas with restricted access.
See the product
LBA 63 PG
High-speed barrier with carbon fibre arm and automatic rehinging system. Opens from 0.4 seconds, can be used for up to 15,000 cycles per day. The arm returns to its position after a side impact. Perfect for toll roads, motorways or heavy traffic.
See the product
LBA 10
The LBA 10 is a heavy-duty barrier designed to withstand impacts and intensive use. It can be fitted with reinforced or fibreglass arms for heavy goods vehicles. It operates continuously for up to 10,000 cycles per day. It is fitted in industrial sites, technical hubs and critical infrastructures.
See the product
LBA 86
Heavy-duty anti-vandalism barrier with reinforced axial arm up to 6 metres. Three-phase One-C drive system, continuous operation up to 10,000 cycles/day. Cataphoretic structure, aluminium cover and integrated PL-d safety device. Ideal for sensitive, industrial or high-traffic public sites.
See the product
LBA 86 AVB
Reinforced version of the LBA86 with struts and anti-lift tip supports. Oval arm up to 6 m and integrated electromagnetic lock. Anti-vandalism pack with reinforced protection supplied as standard. Designed for areas at risk of forced entry attempts.
See the product
LBA H20
The LBA H20 tyre killer manufactured by AMCO is a retractable spike barrier with a hydraulic drive system. Made of steel, the H20 is available in lengths of 2 to 5 m, with steel spikes 20 mm thick and 21 cm high, spaced 85 mm apart The drive system is integrated in a separate compartment, accessible without disassembling the tyre killer The H20 is supplied with a 10 m cable for connection to the One-C control module. The high strength steel driving surface ensures durability and resistance to intensive use, even in environments subject to heavy traffic. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product
LBA H10
The LBA H10 tyre killer manufactured by AMCO is a retractable spike barrier with a universal joint transmission Made of steel, the H10 is available in lengths of 1 to 4.5 m, with 10 cm high steel spikes, spaced 125 mm apart The drive system is offset in a barrier housing or BDCA type unit. The H10 is a device to be mounted on a concrete slab. In the open position, it reduces the speed of vehicles. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product
AB-C50
The ALE-AB-C50 security barrier, manufactured by AMCO, is an automatic boom security barrier. Equipped with a 135 x 93 mm oval aluminium axial arm with an integrated retaining device, it is available in lengths of 2 to 6 m. The AB-C50 barrier is reinforced with two heavy-gauge steel struts to be sealed in a 50 cm deep concrete foundation. It is controlled by One-C logic, and smooth movements are ensured by the One-Sense angle sensor, which manages the acceleration and deceleration ranges. Its precision indicates the arm position to the nearest degree. The housing is made of 4mm thick steel, and the AB-C50 barrier offers all the features of the LBA12 barrier. The main arm is coupled with a second arm below it. The hostile vehicle mitigation (HVM) locking system is automatically activated in the event of an impact, so there is no need to position a device manually for the barrier to be fully effective. Its resistance is certified by a crash test carried out in accordance with IWA 14-1: the AB-C50 barrier stopped a 3.5 HGV lorry travelling at 48 km/h.
See the product