Automatic retractable bollards
TOTEM TSC-S
Stylish technical totem for control logic and access control
Standard characteristics:
- Elliptical totem:
- Totem made of 2 mm thick cataphoresis treated steel with RAL 7016 epoxy powder coating
- Elliptical shape with a length of 448 mm and a width of 331 mm
- Height 1,800 mm
- Hinged door
- Watertight seal around the edge of the door
- Hinge-mounted control board
- 2 sides to be fitted with lights and access control devices with the following dimensions: height 695 mm x width 264 mm, facing both directions of traffic
- Sloping top
- Natural ventilation
- Locking:
- Locking with 2 compression locks
Optional features:
- Plate fitted with a pair of Ø 100 LED lights
- Machining for access control integration
- Integrated triangle emergency services release system
- Preconfigured for the integration of access controls
- Preconfigured for LPR integration
- Thermostatically controlled heater + hygrostat
- Seafront paint treatment
- PVC sealing template + anchor brackets
- Screen and camera unit for a view of the bollard
- Finishes : RAL 7016 steel colour
- Passage height : 1,800 mm
- Cylinder dimension above ground (H-dima) : Elliptical 448 x 331 mm
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBM H12
The LBMH 12 is designed to operate in the open position and to be closed occasionally to close off access to one lane (roads, motorways, lane closures). Can be used on motorways or in urban areas. Length up to 12 m.
See the product
TOTEM TDCA
The TDCA totem pole is a cylindrical piece with a diameter of 25 cm and a variable height between 160 and 250 cm. Made of steel, this totem is composed of several stackable modules to meet all operational needs. It can be fitted with traffic lights and access control equipment (LPR, intercom, badge reader, etc.)
See the product
TOTEM TSC-L
The TSC-S totem is a stylish piece with an elliptical shape, measuring 250 cm high, 448 mm long and 331 mm wide. Made of steel, it enables the integration of a One-C module with its hydraulic pump. Equipped with two flat surfaces oriented at 45°, it allows the integration of traffic lights and the access control equipment needed for operation (LPR, intercom, badge reader, etc.). This model has a third surface designated for access control, accessible by the vehicle driver. Innovative in its design and fittings, this totem can be equipped with a screen for a live view of the bollard and the front of the vehicle.
See the product
RB90C65
The ALE RB90-C65 FP road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 90 cm in height, it is available in lengths of 2 to 4 m. The RB50 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. Its galvanised steel frame is just 50 cm high, so the device can be sealed in a 55 cm deep excavation. The bellows side is made of a flexible material that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered stainless steel sheets removable by a person working alone and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the RB90 does not contain any integrated sensitive elements. Its resistance is certified with a double crash test, during which the RB90 stopped two 7.5-tonne HGVs travelling consecutively at 64 km/h with the device remaining operational after the both impacts and without vehicle penetration, supplemented with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1 proving its ability to stop a 7.5-tonne HGV at 80 km/h.
See the product
EDR12
The ALE EDR12 is a retractable power distribution bollard with a capacity of 4 to 6 x 230V sockets. It has a gas spring-assisted pivoting opening system. The frame is made of galvanised steel, and all visible and moving parts are made of stainless steel. The EDR12 bollard is equipped as standard with a filling cover plate to imitate the type of floor in the construction. The cover plate is equipped with a cable guide, allowing the bollard to be used while connected, in the closed position. The EDR12 bollard is custom-made according to the user’s needs and can accept any type of power (230V / 400V electricity, water, compressed air, RJ45, sound system, etc.). The retaining flange housing the equipment is made of reinforced stainless steel and can be dismantled. It is delivered separately from the bollard, ensuring that the product is intact when received by the customer. The sockets are IP67, and the electrical protections are integrated under an IP67 window. It is locked with a pin lock, with no sunken relief, facilitating preemption and cleaning
See the product