SA25-90C50
Automatic retractable bollard - Withstands the impact of a 7.5 HGV at 80 km/h
Mechanical retractable bollards
SA25-90C50
Automatic retractable bollard - Withstands the impact of a 7.5 HGV at 80 km/h
Standard characteristics:
- Cylinder:
- Steel treated with zinc plating and epoxy powder coating Ø 25 cm - height 90 cm
- RAL 7016 colour
- Stainless steel bollard top, thickness 20 mm
- Brush seal to prevent scratching on housing
- Class 2 reflective tape
- Frame:
- Heavy-gauge steel floor plate protected by a stainless steel cover plate
- Frame made of 6 mm thick galvanised steel
- Lateral guide with HDPE sliders and rollers
- M16 anchor bracket, strengthening connection to the concrete foundation
- Operation:
- Bollard operating system protected by European barrel lock
- Manual operation assisted by a hydraulic compensation system integrated into a compartment adjoining the bollard compartment
- Drive system: Biodegradable hydraulic oil with low viscosity variation
- Standards:
- NFP 98-310-compliant
- Dimensions compliant with the French Decree of 18/09/2012 on the accessibility of roads and public spaces
Optional features:
Security
- Potential-free position contact
- Snap-off nuts to secure bollard access
- Steel cage for reinforcing foundation according to test conditions
- Hanger set for sealing without prior work
Customisation
- Choice of RAL colours
- Finishes : RAL 7016 steel colour
- Resistance : 1,860,000 J
- Foundation dimensions (LxWxH) : 430 x 430 mm + hydraulic compartment 430 x 730 mm
- Cylinder dimension above ground (H-dima) : 900 mm / 250 mm
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product
A25-60-1548
The ALE A25-60-1548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1, during which the bollard stopped a 1.5-tonne car travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system
See the product
A25-60-3548
The ALE A25-60-3548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system.
See the product