R22-100 C50
Removable bollard - Withstands the impact of a 7.5-tonne HGV at 48 km/h
Static bollards
R22-100 C50
Removable bollard - Withstands the impact of a 7.5-tonne HGV at 48 km/h
Standard characteristics:
- Cylinder:
- Hot-dip galvanised steel Ø 16 cm - height 100 cm
- Steel shell sleeve with RAL colour Ø 22 cm
- European barrel lock (triangle) at top of bollard
- Low sealing depth
- Class 2 reflective tape
- Operation:
- Mechanical device lock in its base
- Adjustment pads for bollard levelling
Optional features:
- Special colour paint on RAL base
- Paint with seafront treatment
- Specific fingerprint lock
- Mechanical pin system for fingerprint lock protection
- Finishes : RAL 7016 - 250 ° polyester powder coating
- Resistance : 660,000 J
- Cylinder dimension above ground (H-dima) : 1,000 / 220 mm
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
F25-100 7548
The ALE-F25-100 7548 static bollard manufactured by AMCO is 25 cm in diameter and 1 m high above ground Sealing is optimised in a 49 cm deep ground beam. The bollard has an 8 cm gap between the top of the foundation and the finished level to allow for a floor finish tailored to the project. Its resistance is certified with a crash test in accordance with ISO 22 343-1, during which the bollard stopped a 7.2-tonne HGV travelling at 48 km/h without deforming the bollard and without vehicle entry. Supplied as standard in a Steel RAL finish with a flat top for sealing, a wide range of configurations is available, including stainless steel sleeve, seafront treatment, integration of LEDs or customised sleeve.
See the product
F25-100 7564
The ALE-F25-100 7564 static bollard manufactured by AMCO is 25 cm in diameter and 1 m high above ground This model is lined with an interchangeable microblasted stainless steel sleeve. Sealing is optimised in a 68 cm deep ground beam with an 8 cm gap to allow for a floor finish tailored to the project. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with the IWA14-1 standard, during which a bollard stopped a 7.5-tonne HGV travelling at 64 km/h without vehicle entry. A wide range of configurations is available, including RAL colours, seafront treatment, integrated LEDs or customised sleeve.
See the product
F25-100 12080
The ALE-F25-100 12080 static bollard manufactured by AMCO is 25 cm in diameter and 1 m high above ground This model is lined with an interchangeable microblasted stainless steel sleeve. Sealing is optimised in a 68 cm deep ground beam with an 8 cm gap to allow for a floor finish tailored to the project. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with the IWA14-1 standard, during which a bollard stopped a 12-tonne HGV travelling at 80 km/h. A wide range of configurations is available, including RAL colours, seafront treatment, integrated LEDs or customised sleeve.
See the product
A25-60-1548
The ALE A25-60-1548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1, during which the bollard stopped a 1.5-tonne car travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system
See the product