RB90C65
Retractable road blocker - Withstands the impact of a 7.5-tonne HGV at 80 km/h
Road blocker & Tyre Killers
RB90C65
Retractable road blocker - Withstands the impact of a 7.5-tonne HGV at 80 km/h
Standard characteristics:
- Tread plate:
- Chequered stainless steel tread plate
- Driving surface composed of multiple plates removable by a person working alone
- Front part:
- Moving section treated by hot-dip galvanising and covered with a flexible front part preventing deformation and risks of the device jamming
- Frame: Low depth in galvanised steel
- Drive system:
- Remote hydraulic drive system (factory connected circuit), the road blocker is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
- Biodegradable hydraulic oil with low viscosity variation
- Water outlets: Preconfigured for connection with Ø100 PVC
Optional features:
Security
- LED strip on the front part
- Horizontal retroreflective tape
- EFO: Extra Fast Operation
Customisation
- Frost-free cylinder system
- Cold weather oil
- Upper limit switch
- Operation time : 4 to 6 s
- MCBF (number of cycles) : 2,000,000
- MTBF (hours) : 25,000
- MTTR (min) : 30 min
- Finishes : RAL 9010 & 3001 flexible front part
- Drive system : Remote hydraulics
- Resistance : 1,860,000 J
- Passage width : 2m / 3m and 4m
- Connection : 15 m of hydraulic pipe
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
A25-60 C80
The ALE A25-60-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 60 cm high and painted with RAL, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test, during which the bollard stopped a 1.75-tonne HGV travelling at 80km/h, with the bollard remaining operational after the impact and without vehicle entry, supplemented by a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, proving its ability to stop a 7.5-tonne HGV travelling at 64km/h.
See the product
TOTEM TDCA
The TDCA totem pole is a cylindrical piece with a diameter of 25 cm and a variable height between 160 and 250 cm. Made of steel, this totem is composed of several stackable modules to meet all operational needs. It can be fitted with traffic lights and access control equipment (LPR, intercom, badge reader, etc.)
See the product
TOTEM TSC-S
The TSC-S totem is a stylish piece with an elliptical shape, measuring 180 cm high, 448 mm long and 331 mm wide. Made of steel, it enables the integration of a One-C module with its hydraulic pump. Equipped with two flat surfaces oriented at 45°, it allows the integration of traffic lights and the access control equipment needed for operation (LPR, intercom, badge reader, etc.). Innovative in its design and fittings, this totem can be equipped with a screen for a live view of the bollard and the front of the vehicle.
See the product
RB50-C50 FP
The ALE RB50-C50 FP road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 50 cm in height, it is available in lengths of 2.5 to 4 m. The RB50 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. Its galvanised steel frame is just 12 cm high, allowing the device to be sealed in a 30 cm deep excavation. The RB50 can also be fixed to an existing or new concrete slab with access ramps. The bellows side is made of a flexible material that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered sheets removable by a person working alone and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the RB50 does not contain any integrated sensitive elements. Its resistance is certified by a digital crash test carried out by an independent Cofrac-accredited body in accordance with ISO 22343-1. The RB50 stopped a 7.2-tonne HGV travelling at 48 km/h. "
See the product
RB80-C80
The ALE RB80-C80 road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 80 cm in height, it is available in lengths of 2 to 4 m. The RB80 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. The reinforced steel side is made of a single piece that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered stainless steel sheets removable by a person working alone, and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (totem, cabinet, technical room, etc.). The underground part of the RB80 does not contain any integrated sensitive elements. Its resistance is certified by a double crash test, during which the RB80 stopped two 7.5-tonne HGVs travelling consecutively at 64 then 80 km/h, with the device remaining operational after both impacts and without vehicle penetration.
See the product
RB100-C80
The RB100-C80 automatic retractable road blocker, manufactured by AMCO, is designed to protect the most sensitive sites from hostile vehicles. It can withstand an impact of 12 tonnes at 80 km/h and is recommended for Seveso sites, embassies, and very high-security areas. The galvanised steel frame and stainless steel driving surface guarantee durability and resistance to wear, while the flexible front part prevents the device from jamming in the event of an impact. Thanks to its low sealing depth, the RB100-C80 is easy to install, without needing any major structural work. The drive system is a remote hydraulic system, with no sensitive elements integrated in the frame, ensuring maximum reliability. Its resistance has been validated by a double crash test certified by an independent Cofrac-accredited body: It is capable of stopping a 7.5-tonne vehicle at 80 km/h, then a 12-tonne vehicle at 80 km/h, with the system remaining operational after both impacts.
See the product
EDR12
The ALE EDR12 is a retractable power distribution bollard with a capacity of 4 to 6 x 230V sockets. It has a gas spring-assisted pivoting opening system. The frame is made of galvanised steel, and all visible and moving parts are made of stainless steel. The EDR12 bollard is equipped as standard with a filling cover plate to imitate the type of floor in the construction. The cover plate is equipped with a cable guide, allowing the bollard to be used while connected, in the closed position. The EDR12 bollard is custom-made according to the user’s needs and can accept any type of power (230V / 400V electricity, water, compressed air, RJ45, sound system, etc.). The retaining flange housing the equipment is made of reinforced stainless steel and can be dismantled. It is delivered separately from the bollard, ensuring that the product is intact when received by the customer. The sockets are IP67, and the electrical protections are integrated under an IP67 window. It is locked with a pin lock, with no sunken relief, facilitating preemption and cleaning
See the product