RB50-C50 FP
Retractable road blocker - Withstands the impact of a 7.2-tonne HGV at 48 km/h
Road blocker & Tyre Killers
RB50-C50 FP
Retractable road blocker - Withstands the impact of a 7.2-tonne HGV at 48 km/h
Standard characteristics:
- Tread plate:
- Hot-dip galvanised chequered steel tread plates
- Driving surface composed of multiple plates removable by a person working alone
- Frame: Very low 12 cm depth in galvanised steel
- Drive system:
- Remote hydraulic drive system (factory connected circuit), the road blocker is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
- Biodegradable hydraulic oil with low viscosity variation
- Installation:
- Water outlets preconfigured for connection with Ø100 PVC
Optional features:
Security
- LED strip on the front part
Customisation
- Frost-free cylinder system
- Cold weather oil
- Upper limit switch
- Set of ramps for surface mounting on concrete slab
- Operation time : 4 to 6 s
- MCBF (number of cycles) : 3,000,000
- MTBF (hours) : 25,000
- MTTR (min) : 30
- Finishes : RAL 9010 & 3001 flexible front part
- Drive system : Remote hydraulics
- Resistance : 640,000 J
- Overall dimensions (LxWxH) : 2.5m / 3m and 4m
- Passage width : Up to 4 m
- Connection : 15 m of hydraulic pipe
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
RB80-C80
The ALE RB80-C80 road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 80 cm in height, it is available in lengths of 2 to 4 m. The RB80 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. The reinforced steel side is made of a single piece that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered stainless steel sheets removable by a person working alone, and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (totem, cabinet, technical room, etc.). The underground part of the RB80 does not contain any integrated sensitive elements. Its resistance is certified by a double crash test, during which the RB80 stopped two 7.5-tonne HGVs travelling consecutively at 64 then 80 km/h, with the device remaining operational after both impacts and without vehicle penetration.
See the product
RB90C65
The ALE RB90-C65 FP road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 90 cm in height, it is available in lengths of 2 to 4 m. The RB50 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. Its galvanised steel frame is just 50 cm high, so the device can be sealed in a 55 cm deep excavation. The bellows side is made of a flexible material that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered stainless steel sheets removable by a person working alone and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the RB90 does not contain any integrated sensitive elements. Its resistance is certified with a double crash test, during which the RB90 stopped two 7.5-tonne HGVs travelling consecutively at 64 km/h with the device remaining operational after the both impacts and without vehicle penetration, supplemented with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1 proving its ability to stop a 7.5-tonne HGV at 80 km/h.
See the product
RB100-C80
The RB100-C80 automatic retractable road blocker, manufactured by AMCO, is designed to protect the most sensitive sites from hostile vehicles. It can withstand an impact of 12 tonnes at 80 km/h and is recommended for Seveso sites, embassies, and very high-security areas. The galvanised steel frame and stainless steel driving surface guarantee durability and resistance to wear, while the flexible front part prevents the device from jamming in the event of an impact. Thanks to its low sealing depth, the RB100-C80 is easy to install, without needing any major structural work. The drive system is a remote hydraulic system, with no sensitive elements integrated in the frame, ensuring maximum reliability. Its resistance has been validated by a double crash test certified by an independent Cofrac-accredited body: It is capable of stopping a 7.5-tonne vehicle at 80 km/h, then a 12-tonne vehicle at 80 km/h, with the system remaining operational after both impacts.
See the product
LBA H20
The LBA H20 tyre killer manufactured by AMCO is a retractable spike barrier with a hydraulic drive system. Made of steel, the H20 is available in lengths of 2 to 5 m, with steel spikes 20 mm thick and 21 cm high, spaced 85 mm apart The drive system is integrated in a separate compartment, accessible without disassembling the tyre killer The H20 is supplied with a 10 m cable for connection to the One-C control module. The high strength steel driving surface ensures durability and resistance to intensive use, even in environments subject to heavy traffic. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product
LBA H10
The LBA H10 tyre killer manufactured by AMCO is a retractable spike barrier with a universal joint transmission Made of steel, the H10 is available in lengths of 1 to 4.5 m, with 10 cm high steel spikes, spaced 125 mm apart The drive system is offset in a barrier housing or BDCA type unit. The H10 is a device to be mounted on a concrete slab. In the open position, it reduces the speed of vehicles. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product