AB-C50
Automatic security barrier withstands the impact of a 3.5-tonne HGV at 48km/h
Security barriers and gates
AB-C50
Automatic security barrier withstands the impact of a 3.5-tonne HGV at 48km/h
Standard characteristics:
- Arm: 135 x 93 mm aluminium oval axial
- Housing: 4 mm thick cataphoresis treated pickled metal sheet
- Cover: 3 mm thick steel
- Finishes: RAL 5015 housing, AVB small posts and 1/2 RAL 9010 shells
- ONE-C control board including: Power supply, PLC, frequency converter, SD card, RJ45 (Modbus) and torque limiter
- Automatic locking at the moment of impact
- Lockable by padlock
- Angle sensor
Optional features:
Security
- Internal mechanical lock
- Electromechanical arm lock
- Magnetic lock
- Housing protection kit lockable by padlock
- Small light post to be mounted on struts
- Flashing light
- Reporting to terminal block
- IR cell
- Loop detector
- Fixed + articulated low grid
Customisation
- Choice of RAL colours on housing
- RAL colour on struts
- Boom : 135 x 93 mm
- Operation time : 10 to 15 s
- MCBF (number of cycles) : ≥ 3 million
- MTBF (hours) : ≥ 15,000
- MTTR (min) : Less than 30 minutes
- Maximum boom length : 3 to 6 m
- Finishes : RAL 5015 barrier housing /RAL 9010 posts & arm
- Drive system : Electric - 230V
- Resistance : 311,000 J
- Behavior in case of power cut : Crank operation
- Operating temperature : '-30° to +55° C
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBA 10
The LBA 10 is a heavy-duty barrier designed to withstand impacts and intensive use. It can be fitted with reinforced or fibreglass arms for heavy goods vehicles. It operates continuously for up to 10,000 cycles per day. It is fitted in industrial sites, technical hubs and critical infrastructures.
See the product
LBA 12
Heavy-duty automatic barrier designed for passages of up to 12 m. It incorporates a one-piece aluminium or fibreglass arm without bracing. The three-phase drive system is managed by a ONE-C card for intensive use. Ideal for logistics sites or HGV access.
See the product
LBA 86
Heavy-duty anti-vandalism barrier with reinforced axial arm up to 6 metres. Three-phase One-C drive system, continuous operation up to 10,000 cycles/day. Cataphoretic structure, aluminium cover and integrated PL-d safety device. Ideal for sensitive, industrial or high-traffic public sites.
See the product
LBA H20
The LBA H20 tyre killer manufactured by AMCO is a retractable spike barrier with a hydraulic drive system. Made of steel, the H20 is available in lengths of 2 to 5 m, with steel spikes 20 mm thick and 21 cm high, spaced 85 mm apart The drive system is integrated in a separate compartment, accessible without disassembling the tyre killer The H20 is supplied with a 10 m cable for connection to the One-C control module. The high strength steel driving surface ensures durability and resistance to intensive use, even in environments subject to heavy traffic. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product
LBA H10
The LBA H10 tyre killer manufactured by AMCO is a retractable spike barrier with a universal joint transmission Made of steel, the H10 is available in lengths of 1 to 4.5 m, with 10 cm high steel spikes, spaced 125 mm apart The drive system is offset in a barrier housing or BDCA type unit. The H10 is a device to be mounted on a concrete slab. In the open position, it reduces the speed of vehicles. This device can be used alone or in combination with a barrier or gate, depending on the specific needs of the site
See the product