A25-100 C80+
Automatic retractable bollard - Withstands the impact of a 12-tonne HGV at 80 km/h
Automatic retractable bollards
A25-100 C80+
Automatic retractable bollard - Withstands the impact of a 12-tonne HGV at 80 km/h
Standard characteristics:
- Cylinder:
- Hot-dip galvanised steel Ø 25 cm - height 100 cm
- Microblasted stainless steel sleeve
- Stainless steel bollard top, thickness 20 mm
- Brush seal to prevent scratching on housing
- Class 2 reflective tape
- Frame:
- Heavy-gauge steel floor plate protected by a stainless steel cover plate
- Lateral guide with HDPE sliders and rollers
- Frame made of 10 mm thick galvanised steel
- M16 anchor bracket, strengthening connection to the concrete foundation
- Drive system:
- Remote hydraulic drive system (factory connected circuit), the bollard is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
- Low limit switch integrated into the cylinder head, accessible without disassembling the bollard
- Biodegradable hydraulic oil with low viscosity variation
- Standards:
- NFP 98-310-compliant
- Dimensions compliant with the French Decree of 18/09/2012 on the accessibility of roads and public spaces
Standard equipment:
Security
- Upper limit switch
- Snap-off nuts to secure bollard access
- Heating system for cold weather or exposure to snow or frost conditions
- Cold weather oil
Customisation
- LED strip on the bollard head
- Choice of RAL colours on stainless steel
- Customisation on the bollard head
- Installation aid: Installation kit (steel cage foot hanger)
- Operation time : 4 to 6 s
- MCBF (number of cycles) : 2 000 000
- MTBF (hours) : 25,000 h
- MTTR (min) : 30 min
- Finishes : Microblasted stainless steel
- Drive system : Remote hydraulics
- Resistance : 2,962,000 J
- Foundation dimensions (LxWxH) : 430 x 430 mm
- Overall dimensions (LxWxH) : 1,000 mm / 250 mm
- Operating temperature : '-20°C to +50°C
- Connection cable : 15 m of hydraulic pipes supplied
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
F25-100 7548
The ALE-F25-100 7548 static bollard manufactured by AMCO is 25 cm in diameter and 1 m high above ground Sealing is optimised in a 49 cm deep ground beam. The bollard has an 8 cm gap between the top of the foundation and the finished level to allow for a floor finish tailored to the project. Its resistance is certified with a crash test in accordance with ISO 22 343-1, during which the bollard stopped a 7.2-tonne HGV travelling at 48 km/h without deforming the bollard and without vehicle entry. Supplied as standard in a Steel RAL finish with a flat top for sealing, a wide range of configurations is available, including stainless steel sleeve, seafront treatment, integration of LEDs or customised sleeve.
See the product
F25-100 7564
The ALE-F25-100 7564 static bollard manufactured by AMCO is 25 cm in diameter and 1 m high above ground This model is lined with an interchangeable microblasted stainless steel sleeve. Sealing is optimised in a 68 cm deep ground beam with an 8 cm gap to allow for a floor finish tailored to the project. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with the IWA14-1 standard, during which a bollard stopped a 7.5-tonne HGV travelling at 64 km/h without vehicle entry. A wide range of configurations is available, including RAL colours, seafront treatment, integrated LEDs or customised sleeve.
See the product
F25-100 12080
The ALE-F25-100 12080 static bollard manufactured by AMCO is 25 cm in diameter and 1 m high above ground This model is lined with an interchangeable microblasted stainless steel sleeve. Sealing is optimised in a 68 cm deep ground beam with an 8 cm gap to allow for a floor finish tailored to the project. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with the IWA14-1 standard, during which a bollard stopped a 12-tonne HGV travelling at 80 km/h. A wide range of configurations is available, including RAL colours, seafront treatment, integrated LEDs or customised sleeve.
See the product
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product