Static bollards
R25-60
Removable bollard, height 60 cm, diameter 25 cm
Main advantages
URBAN PEDESTRIAN PROTECTION
Protecting occasional access to a closed area
PEDESTRIAN SAFETY
Enhanced pedestrian safety: embedded base with integrated cover to help avoid pedestrians tripping.
ALE R25-60 type steel removable bollard from AMCO, Ø 25 cm height above ground: 60 cm, thickness 4 mm, corrosion-proof treatment + thermo-lacquering. Choice of RAL colours, equipped with lifting handle integrated into the top of the bollard, with RAL9005 rectangular cast iron base, L370 x W 260 x H 190 mm, 11 mm triangular key release system, supplied with an operating key. Base sealing without adding a cover or mounted element - Drainage at the bottom of the base for laying on a drainage bed
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product
A25-60-1548
The ALE A25-60-1548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1, during which the bollard stopped a 1.5-tonne car travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system
See the product
A25-60-3548
The ALE A25-60-3548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system.
See the product
A25-100 7548
The ALE A25-100-7548 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high and RAL-painted, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with ISO 22343-1, during which the bollard stopped a 7.2-tonne HGV travelling at 48 m/h with the bollard remaining operational after the impact and without vehicle entry. A wide range of configurations is available, including stainless steel sleeves, seafront treatment or integrated LEDs.
See the product
A25-100 C80
The ALE A25-100-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high, the bollard is lined with a microblasted stainless steel shell and can incorporate an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with IWA 14-1, during which the bollard stopped a 7.2-tonne HGV travelling at 80 m/h with the bollard remaining operational after the impact.
See the product
M14-70
The ALE M14-70 bollard manufactured by AMCO is a manually operated retractable mechanical bollard. Made of steel, 14 cm in diameter and 70 cm high, the bollard is supplied with an installation casing. It is lowered by gravity and raised manually using the operating key, which acts as a lifting handle. The lock is compatible with emergency services access and is integrated into the bollard frame to protect it from impact. The floor plate is made of steel and painted in RAL 7016, and the bollard is also available in stainless steel. A wide range of configurations is available, including RAL colours, seafront treatment, customised lock and anti-vandalism screws
See the product
M20-70
The ALE M20-70 bollard manufactured by AMCO is a manually operated retractable mechanical bollard. Made of steel, 20 cm in diameter and 70 cm high, the bollard is supplied with an installation casing. It is lowered by gravity and raised manually using the operating key, which acts as a lifting handle. Compatible with emergency services access, the lock is integrated into the bollard frame to protect it from impact. The floor plate is made of steel and painted in RAL 7016, and the bollard is also available with a stainless steel sleeve. A wide range of configurations is available, including RAL colours, seafront treatment, customised lock and anti-vandalism screws
See the product