MSB-C80
Manual security barrier - Withstands the impact of a 7.2-tonne HGV at 80 km/h
Security barriers and gates
MSB-C80
Manual security barrier - Withstands the impact of a 7.2-tonne HGV at 80 km/h
Standard characteristics:
- Arm: Steel 120 x 120 mm
- Posts: Heavy-gauge steel Ø 250 mm
- Treatment:
- Arm: galvanised steel and thermo-lacquering
- Posts: zinc plating and thermo-lacquering
- Opening: 180° in both traffic directions
- Lock: lockable by padlock in closed position
- Bracing: From 7 m
Optional equipment:
Customisation
- Position contact
- Choice of RAL colours
- Pin lockable by padlock
- Reflective tape
- Two-tone post/arm colour
- Boom : Steel 120 x 120 mm
- Maximum boom length : 2 to 10 m
- Finishes : RAL 7016 polyurethane paint
- Resistance : 1,777,000 J
- Locking : Closing pin
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBA 6
LBA 6 is a fast barrier suitable for high-traffic sites. It combines a powerful drive system and anti-vandalism components. Available with cover with LEDs and customised paintwork. Suitable for public or commercial access.
See the product
LBM H12
The LBMH 12 is designed to operate in the open position and to be closed occasionally to close off access to one lane (roads, motorways, lane closures). Can be used on motorways or in urban areas. Length up to 12 m.
See the product
MISS SCREEN
Transform the customer experience with Miss Screen, the communicating barrier. Its high-quality screen allows you to broadcast content and personalise customer service. Thanks to this system, you can create a new point of contact with your visitors. Option available for LBA 6, LBA 63 PK and LBA 63 PG
See the product
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product
A25-60-1548
The ALE A25-60-1548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1, during which the bollard stopped a 1.5-tonne car travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system
See the product
A25-60-3548
The ALE A25-60-3548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system.
See the product
A25-100 7548
The ALE A25-100-7548 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high and RAL-painted, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with ISO 22343-1, during which the bollard stopped a 7.2-tonne HGV travelling at 48 m/h with the bollard remaining operational after the impact and without vehicle entry. A wide range of configurations is available, including stainless steel sleeves, seafront treatment or integrated LEDs.
See the product
A25-100 C80
The ALE A25-100-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high, the bollard is lined with a microblasted stainless steel shell and can incorporate an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with IWA 14-1, during which the bollard stopped a 7.2-tonne HGV travelling at 80 m/h with the bollard remaining operational after the impact.
See the product