MSB-C50
Manual security barrier - Withstands the impact of a 7.5-tonne HGV at 48 km/h
Security barriers and gates
MSB-C50
Manual security barrier - Withstands the impact of a 7.5-tonne HGV at 48 km/h
Standard characteristics:
- Arm: Steel 120 x 120 mm
- Posts: Heavy-gauge steel Ø 250 mm
- Treatment:
- Arm: galvanised steel and thermo-lacquering
- Posts: zinc plating and thermo-lacquering
- Opening: 180° in both traffic directions
- Lock: lockable by padlock in closed position
Optional features:
Customisation
- Position contact
- Choice of RAL colours
- Pin lockable by padlock
- Reflective tape
- Two-tone post/arm colour
- Boom : Steel 120 x 120 mm
- Maximum boom length : 2 to 6 m
- Finishes : RAL 7016 polyurethane paint
- Resistance : 667,000 J
- Locking : Closing pin
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product
A25-60-1548
The ALE A25-60-1548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1, during which the bollard stopped a 1.5-tonne car travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system
See the product
A25-60-3548
The ALE A25-60-3548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system.
See the product
A25-100 7548
The ALE A25-100-7548 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high and RAL-painted, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with ISO 22343-1, during which the bollard stopped a 7.2-tonne HGV travelling at 48 m/h with the bollard remaining operational after the impact and without vehicle entry. A wide range of configurations is available, including stainless steel sleeves, seafront treatment or integrated LEDs.
See the product
A25-100 C80
The ALE A25-100-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high, the bollard is lined with a microblasted stainless steel shell and can incorporate an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with IWA 14-1, during which the bollard stopped a 7.2-tonne HGV travelling at 80 m/h with the bollard remaining operational after the impact.
See the product
SA14-70
The ALE SA14-70 bollard manufactured by AMCO is a retractable mechanical bollard with semi-automatic operation. Made of steel, 14 cm in diameter, 70 cm high. The bollard is supplied with an installation casing. The bollard is lowered by pressing on the bollard and raised automatically by a gas cylinder. It is fitted with a mid-height locking device to make lowering easier, and locks automatically in the high and low positions. Compatible with emergency services access, the lock is integrated into the bollard frame to protect it from impact. The floor plate is made of steel and painted in RAL 7016, and the bollard is also available in stainless steel. A wide range of configurations is available, including RAL colours, seafront treatment, customised lock and anti-vandalism screws.
See the product
SA20-70
The ALE SA20-70 bollard manufactured by AMCO is a retractable mechanical bollard with semi-automatic operation. Made of steel, 20 cm in diameter and 70 cm high, the bollard is supplied with an installation casing. The bollard is lowered by pressing on the bollard and raised automatically by a gas cylinder. It is fitted with a mid-height locking device to make lowering easier, and locks automatically in the high and low positions. Compatible with emergency services access, the lock is integrated into the bollard frame to protect it from impact. The floor plate is made of steel and painted in RAL 7016, and the bollard is also available with a stainless steel sleeve. A wide range of configurations is available, including RAL colours, seafront treatment, customised lock and anti-vandalism screws.
See the product
SA25-60-1548
The ALE SA25-60 1548 bollard manufactured by AMCO is a retractable mechanical bollard with semi-automatic operation. Made of steel, 25 cm in diameter and 60 cm high, the bollard is supplied with an installation casing. The bollard is lowered by pressing on the bollard and raised automatically by a gas cylinder. Compatible with emergency services access, the lock is integrated into the bollard head, and the floor plate and top of the cylinder are made of stainless steel. A wide range of configurations is available, including stainless steel sleeve, RAL colours, seafront treatment, customised locks and anti-vandalism screws. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 1.5-tonne car travelling at 48 km/h without vehicle entry
See the product